If you’re reading this, then you’re interested in purchasing an indoor steam sauna. Saunas have a lot of benefits that appeal to a wide range of people, which is why their popularity has been on the rise in recent years.
But before you can enjoy all the benefits that an indoor portable sauna has to offer, there are a few things you need to know about installation. In this blog post, we’ll go over some tips on properly installing an indoor steam sauna to get the most out of it.
The guide to indoor steam sauna: How difficult is it?
An indoor steam sauna can provide you with various benefits, including relaxation, detoxification, improved circulation, and more. But before you can start reaping the rewards of owning a steam sauna, there are a few things you need to do first. Namely, you need to install it.
Installing a steam sauna may seem daunting, but it’s not as difficult as it seems—provided you know what you’re doing. Here, we’ll give tips on properly installing an indoor steam sauna so you can start using it as soon as possible.
Before You Begin Installation…
Before you begin the installation process, there are a few things you need to take into consideration.
- First and foremost, you must ensure that the room where you plan to install the sauna is large enough. The sauna should have at least 8 square feet of floor space and be tall enough to allow for 6-8 inches of clearance above your head.
- Additionally, the room should have proper ventilation so that the humid air produced by the sauna can escape.
Additional tips to check out:
If the room where you want to install the sauna doesn’t have proper ventilation, don’t worry—there are ways around it.
- One option is to install an exhaust fan near the top of the doorframe; another is to leave the door open a crack during use so that air can circulate.
- Whichever option you choose, just ensure that there is enough airflow so that the humidity levels don’t get too high and cause condensation on the walls or ceiling.
Installing the Sauna Heater Unit
- Once you’ve taken care of ventilation, installing the sauna heater unit is next. The heater unit should be placed on a non-combustible surface such as concrete, stone, or tile—never on wood or carpeting.
- Once you’ve found a suitable location for the heater unit, use screws or nails to secure it in place.
- Next, connect the power cord to a properly grounded outlet and plug it in; then, fill the reservoir with water up to the “MAX” line indicated on the unit.
- Once the reservoir is full, press the “ON/OFF” switch located on the front of the unit and wait for it to heat up; this usually takes between 30 and 60 minutes.
- Once heated up, an Indoor Steam Sauna is ready for use! Just remember to keep an eye on the water level to avoid overheating or damaging the unit—you may need to add more water throughout your session as evaporation occurs.
Conclusion:
Now that you know how easy installing an indoor steam sauna is, what are you waiting for? Go ahead and reap all of its wonderful benefits! And if you ever have any questions or run into any problems during installation or use, don’t hesitate to contact the experts.
